logo logo
  • Home
  • About Us
    • Overview
    • Why Enrgtech
    • Our Resource
  • Our Services
    • Energy Auditing
    • Electrical
    • HVAC
    • Fire and Life Safety
    • BMS/ IBMS
    • Green Building
  • Our Clients
  • Contact Us
  • background

    Energy Efficient Electrical system

  • background

    power quality

  • background

    power quality

  • background

    power quality

  • background

    power quality

CAPTIVE/CENTRAL POWER GENERATION PLANT DESIGN/UPGRADATION SERVICE

Energy efficient, safety and cost effective Power Generation Plant Design/Upgradation considering

  • Supply side and demand side management
  • System safety, fire and shock hazards

Selection of appropriate switchgear (circuit breaker, Fuse, ELCB, cable, earthing network) at every upstream and downstream network as per prospective short circuit current and earth fault loop impedance as well as proper discrimination.

Designed to comply the code of BNBC 2006, NFPA 70, NFPA 70B, NFPA 70E, BS 7671, the requirements of Accord, Alliance, ILO and the guideline of Green Building.

POWER QUALITY MANAGEMENT SERVICE

Harmonices, Voltage fluctuations and impulse transient are common power disturbances present in any electrical environment that directly affect electronic equipment. These disturbances exist in numerous forms including transients, sags, swells, over voltages, under voltages, Flicker, harmonics, frequency variations and high frequency noise.

A Quality Power is the ability of a electrical network's to supply a clean and stable power to a system without any disturbance

Impact of low power quality:

  • Equipment longevity reduce by half
  • Equipment damage
  • Wasted energy / higher electric bills - kW & kWh
  • Decreased kVA capacity
  • Overheating of transformers & rotating equipment
  • Overheating of motors (insulation breakdown).
  • Motor bearings failures and reduced efficiency
  • Equipment heating
  • Equipment malfunction
  • Equipment failure
  • Communications interference
  • Fuse and breaker mis-operation
  • Process problems
  • Conductor heating
  • Risk of fire hazards

A quality power ensure the smooth and reliable operation and increase the the safety margin. The most economical benefit is increase all the equipment’s lifetime used in process.

In the light of Energy and safety compliance requirements a good quality power is a techno-economic optimal solution for any type of establishments without any analysis.

ENRG TECH conducting a detailed assessment for Power quality and provide effective mitigation solution.

TESTING SERVICES

  • Prospective Short Circuit current test at every upstream and downstream network
  • Earth Fault Loop Impedance test for effective earthing network
  • Earth resistance and insulation resistance test
  • Ground resistivity test
  • Phase sequence/rotation test
  • Polarity and continuity test
  • Thermographic survey

 

House# 25, Road# 5, DIT Project, Merul Badda, Dhaka-1212

+88-01711487709 [email protected], [email protected]

+88-01711487709
[email protected], [email protected]

Copyright © ENRGTECH 2017 All right reserved. Developed By Virtual Design